FREE delivery for orders above QAR 500!
Menu
Shopping cart
You have no items in your shopping cart.
Filters
View as Grid List
Sort by
Display per page

Makita | MAK/PC5001C | Concrete Planer 125mm (5")

MAK/PC-5001C

Models PC5001C are upgraded sister tools of PC1100. Features electronic control, allowing for use of powerful 1,400W motor. Features top handle and front and base rollers.

3,738.00 (QAR)

Makita | MAK/SG1251J | Wall Chaser with Makpac - 125mm (5")

MAK/SG-1251J

Waterproof cover is attached to the back of the motor housing (the inlet of cooling wind). The lower part (on the base side) and the side (about 2/3 on the handle side) of the window between the motor housing and the gear housing are sealed to prevent water from coming in.

2,626.00 (QAR)

Makita | MAK/SG150 | Wall Chaser - 150mm (6")

MAK/SG-150

Makita SG150 is used for making grooves in stone, brick and concrete walls, for laying pipes and wiring. When a risk of overheating, the instrument switches off automatically, has low noise and vibration. The main tool handle is covered with rubber - to prevent the hand from slipping. An additional rubberized handle can be installed on both sides of the Makita SG150 shredder. High torque. Electronic system with optical indication. Double protective insulation. The width of the groove is 7-45 mm.

4,682.00 (QAR)

Makita | MAK/SG150110V | Wall Chaser - 150mm (6")

MAK/SG-150-110V

Makita SG150 is used for making grooves in stone, brick and concrete walls, for laying pipes and wiring. When a risk of overheating, the instrument switches off automatically, has low noise and vibration. The main tool handle is covered with rubber - to prevent the hand from slipping. An additional rubberized handle can be installed on both sides of the Makita SG150 shredder. High torque. Electronic system with optical indication. Double protective insulation. The width of the groove is 7-45 mm.

4,891.00 (QAR)

Makita | MAK/TB131 | Drill Press 13mm (1/2")

MAK/TB-131

TB-131 Magnetic drill press for drilling and fastening.

1,290.00 (QAR)

Makita | MAKHR2800 | Rotary Hammer- 28mm (8-1/8") | SDS-PLUS

MAK/HR-2800

This rotary hammer has a Highest-in-class efficiency in both drilling and chipping.

1,259.00 (QAR)
Filter by
Min: 0.00 (QAR) Max: 8,319.00 (QAR)
0 8319