Cutting

Makita SG150 is used for making grooves in stone, brick and concrete walls, for laying pipes and wiring. When a risk of overheating, the instrument switches off automatically, has low noise and vibration. The main tool handle is covered with rubber - to prevent the hand from slipping. An additional rubberized handle can be installed on both sides of the Makita SG150 shredder. High torque. Electronic system with optical indication. Double protective insulation. The width of the groove is 7-45 mm.

Makita SG150 is used for making grooves in stone, brick and concrete walls, for laying pipes and wiring. When a risk of overheating, the instrument switches off automatically, has low noise and vibration. The main tool handle is covered with rubber - to prevent the hand from slipping. An additional rubberized handle can be installed on both sides of the Makita SG150 shredder. High torque. Electronic system with optical indication. Double protective insulation. The width of the groove is 7-45 mm.

Developed for cutting grooves in aluminum composite materials.

4112HS 305mm (12") angle cutters have been developed as a successor to the predecessor model 4110C. Their features and benefits are ; * Super Joint System - SJS for suppression of shock and prevention of damage on gear. * 305m (12") diamond wheel which provides max.cutting depth; 100mm (4") can be used.

Waterproof cover is attached to the back of the motor housing (the inlet of cooling wind). The lower part (on the base side) and the side (about 2/3 on the handle side) of the window between the motor housing and the gear housing are sealed to prevent water from coming in.

Waterproof cover is attached to the back of the motor housing (the inlet of cooling wind). The lower part (on the base side) and the side (about 2/3 on the handle side) of the window between the motor housing and the gear housing are sealed to prevent water from coming in.

The LC1230 is powered by a Makita-built 15 amp motor that delivers 1,700 rpm for improved performance. The quick release "tool-less" guide plate adjusts from 0 degrees to 45 degrees for quick and easy miter cutting. Cutting capacities range from 4-1/2 inches at 90 degrees to 3-1/2 inches at 45 degrees.

The Makita 4131 7-1/4 in. Metal Cutting Saw with dust collector makes cuts through a variety of mild steel. The CERMET tipped blade leaves burr-free cuts that are cool to the touch, and the durable blade cover provides increased chip protection. The 4131 is powered by a 13 AMP motor and can cut through steel roofing, conduit, iron pipe and more. The 4131 has a maximum cutting depth of 2-1/2-in. and a high chip retention efficiency.

Model DLW140 is a 355mm (14") Cordless Portable Cut-off Saw powered by two 18V Li-ion batteries in series. Battery & Charger are sold separately.